Lab Furnace, 1600ºC, type HotSpot 110L

TYPE HOT SPOT 110L LAB FURNACE

SPECIFICATIONS

Maximum Continuous Use Temperature 1600°C
Minimum Ramp Time to Reach 1600°C Max Temp 2 hours
Chamber Size 6″ wide X 4″ high X 5″ deep
Working Size (Ware Space) 4.5″ wide X 4″ high X 4.5″ deep
Overall Size (Door Closed) 20″ wide X 16.5″ deep X 16″ high
Overall Size (Door Open) 20″ wide X 19″ deep X 27″ high
Weight (Standard Model) 108 pounds
Thermocouple Dual Element Type B (Pt6%Rh vs. Pt30%Rh)
Molybdenum Disilicide Heating Elements 4
Power Supply Requirement for 110 Volt Model 110V,20A, 60Hz standard US duplex outlet
Power Supply Requirement for 220 Volt Model 220V, 10A, 50-60 Hz , configurable power cord
Element Current at 1600 C Soak ~45Amps AC at 5.5Volts
Transient Peak Current Surge on Start Up 40 Amps AC at 110 Volts
Power Line Consumption at 1600 C Soak ~1320 Watts

Accessories and Recommended Spare Parts

Description Item Number
Heating Element FAB04
Dense Alumina Setter Plate, 3.5″ x 3.5″ x 0.5″ FAF03
Alumina Insulation Setter Plate, 3.5″ x 3.5″ x 0.5″ FAF04
Zirconia Insulation Setter Plate, 3.5″ x 3.5″ x 0.5″ FAF05
Setter Package: one spatula and eight setter plates (two Dense alumina, three each of alumina and zirconia insulation) FAF01
Setter Spatula FAF02
High Temperature Trivet 12″ x 12″ x 1/2″ FAF06
Datalogger with power supply , cables and software. You must order your furnace with the optional 0 to 5 V output (FAA04). Compatible with MS Windows 95,98,2000 and NT. FAF07
Autotransformer power supply with internal fuse can significantly increase the ramp rate in facilities with lower available voltage. FAF08
Shelf System FAF09
Calibration Rings (PTCR’s) – Box of 15 rings FAF10
Dense Sintering Tray with Lid FAHD005

Furnaces include a complimentary box of Precision Temperature Control Rings (PTCR). A PTCR is a highly accurate ceramic temperature indicator which records the true heat treatment received by the fired product. They can be used as either a furnace calibration check or as a record of an individual firing. For a calibration check, fire the ring to 1500 C (or other temperature of interest) ramping at 120 C/hour during the last 200 C of the ramp, and then holding at that temperature for one hour. Compare the measured size of the fired ring to the chart to determine the actual soak temperature. Large differences (>10 C) between measured ring and program temperature indicate need for service or adjustment. A new thermocouple being a likely solution. To use the ring as a firing record, simply place a ring in the furnace along with your work and record its size as a permanent record of the heat treatment actually made in that firing. A PTCR is only good for a single use.

Let UsContact You

  • If you are interested in any of our products and would like more information please fill out the form below.